PRODUCTS

Overcasting Presser Foot (Overedge Foot)

Part No.40080960

Applicable models:HZL-UX8,DX-4000QVP,HZL-NX7,DX-3000QVP,DX-2000QVP,HZL-DX7,HZL-DX5,HZL-F600,HZL-F400,HZL-F300

This presser foot is used to sew overcasting in order to prevent the cut edges of fabric from fraying.

Sew with the edges of the fabric aligned with the guide. The prong in the opening of the presser foot presses down the edge of the fabric to prevent puckering. In addition, the amount of thread going into the stitching is adjusted by the thread crossing the prong, creating a clean finish with little shrinkage. This presser foot cannot be used to sew zigzag stitches or overcasting by 3-point zigzag.

Movie

Overcasting Presser Foot (Overedge Foot)

Part No.40110163

Applicable models:HZL-G220,HZL-G120,HZL-G210,HZL-G110

This presser foot is used to sew overcasting in order to prevent the cut edges of fabric from fraying.

Sew with the edges of the fabric aligned with the guide. The prong in the opening of the presser foot presses down the edge of the fabric to prevent puckering. In addition, the amount of thread going into the stitching is adjusted by the thread crossing the prong, creating a clean finish with little shrinkage. This presser foot cannot be used to sew zigzag stitches or overcasting by 4-point zigzag.

Movie

Overcasting Presser Foot (Overedge Foot)

Part No.40169900

Applicable models:HZL-LB5100,HZL-LB5020

This presser foot is used to sew overcasting in order to prevent the cut edges of fabric from fraying.

Sew with the edges of the fabric aligned with the guide. The prong in the opening of the presser foot presses down the edge of the fabric to prevent puckering. In addition, the amount of thread going into the stitching is adjusted by the thread crossing the prong, creating a clean finish with little shrinkage. This presser foot cannot be used to sew zigzag stitches or overcasting by 5-point zigzag.

Movie

Overcasting Presser Foot (Overedge Foot)

Part No.40145869

Applicable models:HZL-HT740,HZL-HT710,HZL-80HP,HZL-70HW,HZL-60HR,HZL-357ZP,HZL-355ZW,HZL-353ZR

This presser foot is used to sew overcasting in order to prevent the cut edges of fabric from fraying.

Sew with the edges of the fabric aligned with the guide. The prong in the opening of the presser foot presses down the edge of the fabric to prevent puckering. In addition, the amount of thread going into the stitching is adjusted by the thread crossing the prong, creating a clean finish with little shrinkage. This presser foot cannot be used to sew zigzag stitches or overcasting by 5-point zigzag.

Movie

Overcasting Presser Foot (Overedge Foot)

Part No.40050948

Applicable models:

This presser foot is used to sew overcasting in order to prevent the cut edges of fabric from fraying.

Sew with the edges of the fabric aligned with the guide. The prong in the opening of the presser foot presses down the edge of the fabric to prevent puckering. In addition, the amount of thread going into the stitching is adjusted by the thread crossing the prong, creating a clean finish with little shrinkage. This presser foot cannot be used to sew zigzag stitches or overcasting by 7-point zigzag.